Configuring Mediant CE OVOC Internal IP Connection Settings using Web Interface
This section describes how to configure the connection settings between the Mediant CE device and the OVOC server deployed in the Azure Cloud in the same Virtual network.
The following procedure describes the required configuration for a single CE SBC device. For mass deployment, you can load configuration files to multiple devices using 'Full' or 'Incremental' INI file options (refer to the relevant SBC User's Manual for more information).
|
➢
|
To configure the Mediant Cloud Edition (CE) SBC: |
|
1.
|
Login to the Mediant Cloud Edition (CE) SBC Web interface or connect from the Devices page in the OVOC Web interface. |
|
2.
|
Open the TIME & DATE page (Setup menu > Administration tab ) and in the NTP Server Address field, set the Microsoft Azure site IP address/Domain Name(where the OVOC server is installed) as the NTP server clock source. |
|
3.
|
Click Apply to confirm the changes. |
|
4.
|
Open the SNMP Community Settings Page (Setup menu > Administration tab > SNMP folder). |
|
5.
|
Set parameter SNMP Disable to No ('Yes' by default). |
|
6.
|
Click Apply to confirm changes. |
|
7.
|
Open the Mediant Cloud Edition (CE) SBC AdminPage (deviceIPaddress/AdminPage) and configure the following ini parameters: |
HostName = <Load Balancer IP>
SNMPManagerIsUsed_0 = 1
SNMPManagerTableIP_0 = <OVOC Server Internal IP>
|
8.
|
Reset the device for your settings to take effect (Setup menu > Administration tab > Maintenance folder > Maintenance Actions). |